После работы в лабе
parent
c6348a6706
commit
7aa65c26a0
|
@ -0,0 +1,17 @@
|
||||||
|
{
|
||||||
|
"configurations": [
|
||||||
|
{
|
||||||
|
"name": "Linux",
|
||||||
|
"includePath": [
|
||||||
|
"${workspaceFolder}/**",
|
||||||
|
"/home/smart/Arduino/libraries/**"
|
||||||
|
],
|
||||||
|
"defines": [],
|
||||||
|
"compilerPath": "/usr/bin/gcc",
|
||||||
|
"cStandard": "gnu17",
|
||||||
|
"cppStandard": "gnu++14",
|
||||||
|
"intelliSenseMode": "linux-gcc-x64"
|
||||||
|
}
|
||||||
|
],
|
||||||
|
"version": 4
|
||||||
|
}
|
|
@ -18,16 +18,29 @@
|
||||||
#include <ESPmDNS.h>
|
#include <ESPmDNS.h>
|
||||||
#include <ESP32Servo.h>
|
#include <ESP32Servo.h>
|
||||||
|
|
||||||
|
#include <OneWire.h>
|
||||||
|
#include <DallasTemperature.h>
|
||||||
|
|
||||||
|
#define ONE_WIRE_BUS 26
|
||||||
//Наша кнопочка при нажатии на которую произойдет вызов wifi менеджера и перезагрузка в станцию
|
//Наша кнопочка при нажатии на которую произойдет вызов wifi менеджера и перезагрузка в станцию
|
||||||
#define TRIGGER_PIN 39
|
#define TRIGGER_PIN 39
|
||||||
#define SERVO_PIN 33
|
#define SERVO_PIN 33
|
||||||
|
|
||||||
unsigned int VersionSW = 5; //65536 Версия прошивки
|
|
||||||
|
OneWire oneWire(ONE_WIRE_BUS);
|
||||||
|
DallasTemperature sensors(&oneWire);
|
||||||
|
|
||||||
|
DeviceAddress insideThermometer;
|
||||||
|
|
||||||
|
|
||||||
|
unsigned int VersionSW = 8; //65536 Версия прошивки
|
||||||
|
|
||||||
//2 поиск по metrics local
|
//2 поиск по metrics local
|
||||||
//3 -
|
//3 -
|
||||||
//4 - тестовая для проверки загрузки прошивки
|
//4 - тестовая для проверки загрузки прошивки
|
||||||
//5 - логин и пароль
|
//5 - логин и пароль
|
||||||
|
//7- температура
|
||||||
|
//8 атач
|
||||||
|
|
||||||
Servo servoAir;
|
Servo servoAir;
|
||||||
int posServo = 0;
|
int posServo = 0;
|
||||||
|
@ -48,16 +61,20 @@ PubSubClient MqttClient(espClient);
|
||||||
WiFiUDP ntpUDP;
|
WiFiUDP ntpUDP;
|
||||||
NTPClient timeClient(ntpUDP, "192.168.89.210", 0, 30000); //Собственно сервер времени смещение и частоат запроса, но он вручную
|
NTPClient timeClient(ntpUDP, "192.168.89.210", 0, 30000); //Собственно сервер времени смещение и частоат запроса, но он вручную
|
||||||
|
|
||||||
|
float tempC=0;
|
||||||
|
|
||||||
const char *spacePref = "ota-config";
|
const char *spacePref = "ota-config";
|
||||||
const PROGMEM char *mqttHostName = "metrics"; //Хостнейм брокера 192.168.89.210 cctv.automation.art:8889
|
const PROGMEM char *mqttHostName = "metrics"; //Хостнейм брокера 192.168.89.210 cctv.automation.art:8889
|
||||||
unsigned int mqttPort = 1883; //Порт брокера 1883
|
unsigned int mqttPort = 1883; //Порт брокера 1883
|
||||||
|
|
||||||
const PROGMEM char *mqttLogin = "AA_Lab", //Логин пароль - необходимо сменить код при connect()
|
const PROGMEM char *mqttLogin = "AA_Lab", //Логин пароль - необходимо сменить код при connect()
|
||||||
*mqttPass = "automation.art$";
|
*mqttPass = "automation.art$";
|
||||||
const char *mqttIPHost; //тут хранится IP хоста по хостнейму
|
const char *mqttIPHost; //тут хранится IP хоста по хостнейму
|
||||||
|
|
||||||
unsigned long timingUpdate, timingReqSensor, timingSendMqtt, timingAjaxUpdate; //Таймеры для millis()
|
unsigned long timingUpdate,timingUpdateDS, timingReqSensor, timingSendMqtt, timingAjaxUpdate; //Таймеры для millis()
|
||||||
int PROGMEM nextM5Update = 60000; //450000 //каждые 7.5 минут запрос обновления с сервера
|
int PROGMEM nextM5Update = 60000; //450000 //каждые 7.5 минут запрос обновления с сервера
|
||||||
|
int PROGMEM nextM5UpdateDS = 10000; //450000 //каждые 7.5 минут запрос обновления с сервера
|
||||||
|
|
||||||
|
|
||||||
String getMacAddress();
|
String getMacAddress();
|
||||||
String macc = getMacAddress();
|
String macc = getMacAddress();
|
||||||
|
@ -94,11 +111,29 @@ void ledset(char color, bool blink = false)
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
|
void printTemperature(DeviceAddress deviceAddress)
|
||||||
|
{
|
||||||
|
float tempC = sensors.getTempC(deviceAddress);
|
||||||
|
if(tempC == DEVICE_DISCONNECTED_C)
|
||||||
|
{
|
||||||
|
Serial.println("Error: Could not read temperature data");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
Serial.print("Temp C: ");
|
||||||
|
Serial.print(tempC);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
//Настройки
|
//Настройки
|
||||||
void setup()
|
void setup()
|
||||||
{
|
{
|
||||||
M5.begin(true, false, true);
|
M5.begin(true, false, true);
|
||||||
|
|
||||||
|
servoAir.attach(SERVO_PIN);
|
||||||
|
|
||||||
|
sensors.begin();
|
||||||
|
sensors.setResolution(insideThermometer, 9);
|
||||||
|
|
||||||
pinMode(SERVO_PIN, OUTPUT);
|
pinMode(SERVO_PIN, OUTPUT);
|
||||||
digitalWrite(SERVO_PIN, LOW);
|
digitalWrite(SERVO_PIN, LOW);
|
||||||
|
|
||||||
|
@ -146,6 +181,7 @@ void setup()
|
||||||
//Запрос IP сервера MQTT и установка сервера
|
//Запрос IP сервера MQTT и установка сервера
|
||||||
setMqttServer();
|
setMqttServer();
|
||||||
reqNtpTime();
|
reqNtpTime();
|
||||||
|
reqNtpTime();
|
||||||
|
|
||||||
firstStart();
|
firstStart();
|
||||||
}
|
}
|
||||||
|
@ -213,7 +249,7 @@ void moveServo(int SetAngleTmp, int SpeedAngleTmp, int posServoTmp)
|
||||||
|
|
||||||
if ((SetAngleTmp >= 0 && SetAngleTmp <= 100) && (SpeedAngleTmp >= 0 && SpeedAngleTmp <= 50))
|
if ((SetAngleTmp >= 0 && SetAngleTmp <= 100) && (SpeedAngleTmp >= 0 && SpeedAngleTmp <= 50))
|
||||||
{
|
{
|
||||||
servoAir.attach(SERVO_PIN);
|
|
||||||
|
|
||||||
MapAngle = map(SetAngleTmp, 0, 100, 2, 178);
|
MapAngle = map(SetAngleTmp, 0, 100, 2, 178);
|
||||||
// 544 мкс — для 0° и 2400 мкс — для 180°.
|
// 544 мкс — для 0° и 2400 мкс — для 180°.
|
||||||
|
@ -251,7 +287,7 @@ void moveServo(int SetAngleTmp, int SpeedAngleTmp, int posServoTmp)
|
||||||
|
|
||||||
OTApreferences.end();
|
OTApreferences.end();
|
||||||
|
|
||||||
servoAir.detach();
|
// servoAir.detach();
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|
||||||
|
@ -461,7 +497,7 @@ void SendMqttReq()
|
||||||
servoAir.detach();
|
servoAir.detach();
|
||||||
doc["percent"] = SetAngle;
|
doc["percent"] = SetAngle;
|
||||||
doc["rssi"] = rssi;
|
doc["rssi"] = rssi;
|
||||||
doc["lasterror"] = errorID;
|
doc["t"]=tempC;
|
||||||
doc["time"] = now();
|
doc["time"] = now();
|
||||||
|
|
||||||
char resultString[200];
|
char resultString[200];
|
||||||
|
@ -559,6 +595,29 @@ void loop()
|
||||||
SendMqttReq();
|
SendMqttReq();
|
||||||
posServoLast = posServo;
|
posServoLast = posServo;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
|
if (millis() - timingUpdateDS > nextM5UpdateDS)
|
||||||
|
{
|
||||||
|
sensors.requestTemperatures();
|
||||||
|
SendMqttReq();
|
||||||
|
|
||||||
|
tempC = sensors.getTempCByIndex(0);
|
||||||
|
|
||||||
|
// Check if reading was successful
|
||||||
|
if(tempC != DEVICE_DISCONNECTED_C)
|
||||||
|
{
|
||||||
|
Serial.print("Temperature for the device 1 (index 0) is: ");
|
||||||
|
Serial.println(tempC);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
Serial.println("Error: Could not read temperature data");
|
||||||
|
}
|
||||||
|
|
||||||
|
timingUpdateDS = millis();
|
||||||
|
}
|
||||||
|
|
||||||
MqttClient.loop();
|
MqttClient.loop();
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
Binary file not shown.
Binary file not shown.
Binary file not shown.
|
@ -0,0 +1,5 @@
|
||||||
|
.pio
|
||||||
|
.vscode/.browse.c_cpp.db*
|
||||||
|
.vscode/c_cpp_properties.json
|
||||||
|
.vscode/launch.json
|
||||||
|
.vscode/ipch
|
|
@ -0,0 +1,7 @@
|
||||||
|
{
|
||||||
|
// See http://go.microsoft.com/fwlink/?LinkId=827846
|
||||||
|
// for the documentation about the extensions.json format
|
||||||
|
"recommendations": [
|
||||||
|
"platformio.platformio-ide"
|
||||||
|
]
|
||||||
|
}
|
|
@ -0,0 +1,39 @@
|
||||||
|
|
||||||
|
This directory is intended for project header files.
|
||||||
|
|
||||||
|
A header file is a file containing C declarations and macro definitions
|
||||||
|
to be shared between several project source files. You request the use of a
|
||||||
|
header file in your project source file (C, C++, etc) located in `src` folder
|
||||||
|
by including it, with the C preprocessing directive `#include'.
|
||||||
|
|
||||||
|
```src/main.c
|
||||||
|
|
||||||
|
#include "header.h"
|
||||||
|
|
||||||
|
int main (void)
|
||||||
|
{
|
||||||
|
...
|
||||||
|
}
|
||||||
|
```
|
||||||
|
|
||||||
|
Including a header file produces the same results as copying the header file
|
||||||
|
into each source file that needs it. Such copying would be time-consuming
|
||||||
|
and error-prone. With a header file, the related declarations appear
|
||||||
|
in only one place. If they need to be changed, they can be changed in one
|
||||||
|
place, and programs that include the header file will automatically use the
|
||||||
|
new version when next recompiled. The header file eliminates the labor of
|
||||||
|
finding and changing all the copies as well as the risk that a failure to
|
||||||
|
find one copy will result in inconsistencies within a program.
|
||||||
|
|
||||||
|
In C, the usual convention is to give header files names that end with `.h'.
|
||||||
|
It is most portable to use only letters, digits, dashes, and underscores in
|
||||||
|
header file names, and at most one dot.
|
||||||
|
|
||||||
|
Read more about using header files in official GCC documentation:
|
||||||
|
|
||||||
|
* Include Syntax
|
||||||
|
* Include Operation
|
||||||
|
* Once-Only Headers
|
||||||
|
* Computed Includes
|
||||||
|
|
||||||
|
https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html
|
|
@ -0,0 +1,46 @@
|
||||||
|
|
||||||
|
This directory is intended for project specific (private) libraries.
|
||||||
|
PlatformIO will compile them to static libraries and link into executable file.
|
||||||
|
|
||||||
|
The source code of each library should be placed in a an own separate directory
|
||||||
|
("lib/your_library_name/[here are source files]").
|
||||||
|
|
||||||
|
For example, see a structure of the following two libraries `Foo` and `Bar`:
|
||||||
|
|
||||||
|
|--lib
|
||||||
|
| |
|
||||||
|
| |--Bar
|
||||||
|
| | |--docs
|
||||||
|
| | |--examples
|
||||||
|
| | |--src
|
||||||
|
| | |- Bar.c
|
||||||
|
| | |- Bar.h
|
||||||
|
| | |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
|
||||||
|
| |
|
||||||
|
| |--Foo
|
||||||
|
| | |- Foo.c
|
||||||
|
| | |- Foo.h
|
||||||
|
| |
|
||||||
|
| |- README --> THIS FILE
|
||||||
|
|
|
||||||
|
|- platformio.ini
|
||||||
|
|--src
|
||||||
|
|- main.c
|
||||||
|
|
||||||
|
and a contents of `src/main.c`:
|
||||||
|
```
|
||||||
|
#include <Foo.h>
|
||||||
|
#include <Bar.h>
|
||||||
|
|
||||||
|
int main (void)
|
||||||
|
{
|
||||||
|
...
|
||||||
|
}
|
||||||
|
|
||||||
|
```
|
||||||
|
|
||||||
|
PlatformIO Library Dependency Finder will find automatically dependent
|
||||||
|
libraries scanning project source files.
|
||||||
|
|
||||||
|
More information about PlatformIO Library Dependency Finder
|
||||||
|
- https://docs.platformio.org/page/librarymanager/ldf.html
|
|
@ -0,0 +1,6 @@
|
||||||
|
# Name, Type, SubType, Offset, Size, Flags
|
||||||
|
nvs, data, nvs, 0x9000, 0x5000,
|
||||||
|
otadata, data, ota, 0xe000, 0x2000,
|
||||||
|
app0, app, ota_0, 0x10000, 0x1E0000,
|
||||||
|
app1, app, ota_1, 0x1F0000,0x1E0000,
|
||||||
|
spiffs, data, spiffs, 0x3D0000,0x30000,
|
|
|
@ -0,0 +1,16 @@
|
||||||
|
; PlatformIO Project Configuration File
|
||||||
|
;
|
||||||
|
; Build options: build flags, source filter
|
||||||
|
; Upload options: custom upload port, speed and extra flags
|
||||||
|
; Library options: dependencies, extra library storages
|
||||||
|
; Advanced options: extra scripting
|
||||||
|
;
|
||||||
|
; Please visit documentation for the other options and examples
|
||||||
|
; https://docs.platformio.org/page/projectconf.html
|
||||||
|
|
||||||
|
[env:m5stack-atom]
|
||||||
|
platform = espressif32
|
||||||
|
board = m5stack-atom
|
||||||
|
framework = arduino
|
||||||
|
lib_extra_dirs = /home/smart/Arduino/libraries
|
||||||
|
board_build.partitions = min_spiffs.csv
|
|
@ -0,0 +1,577 @@
|
||||||
|
#include <WiFiManager.h> // https://github.com/tzapu/WiFiManager
|
||||||
|
#include <Preferences.h> //Сохранение настроек хеша прошивки
|
||||||
|
#include <HTTPClient.h>
|
||||||
|
#include <ESP32httpUpdate.h> //Библиотека ОТА обновлений
|
||||||
|
#include "M5Atom.h" //Библиотека атома для функции Led и Кнопки, можно упразднить и убрать
|
||||||
|
#include <WiFiUdp.h> //Udp клиент
|
||||||
|
#include <NTPClient.h> //NTP запрос времени
|
||||||
|
#include <TimeLib.h> //Внутреннее время
|
||||||
|
#include <Wire.h> //Библиотека дял I2C
|
||||||
|
#include <PubSubClient.h> //Mtqq
|
||||||
|
#include <ArduinoJson.h> //Упакова в JSon - удобная библиотека
|
||||||
|
#include <ESPmDNS.h>
|
||||||
|
#include <Q2HX711.h>
|
||||||
|
|
||||||
|
// aastudio/act/24A16053B7C4/data/0
|
||||||
|
|
||||||
|
|
||||||
|
#define BPin 21
|
||||||
|
#define APin 25
|
||||||
|
|
||||||
|
const byte hx711_data_pin = 26;
|
||||||
|
const byte hx711_clock_pin = 32;
|
||||||
|
|
||||||
|
#define TRIGGER_PIN 39
|
||||||
|
unsigned int VersionSW = 5;
|
||||||
|
|
||||||
|
Q2HX711 hx711(hx711_data_pin, hx711_clock_pin);
|
||||||
|
|
||||||
|
//3 - Первый код для тензо
|
||||||
|
|
||||||
|
WiFiManager wm; // обьект менеджера
|
||||||
|
Preferences OTApreferences; //Обьект хранения настроек хеша прошивки
|
||||||
|
|
||||||
|
String JsonData;
|
||||||
|
StaticJsonDocument<200> doc, docResult;
|
||||||
|
|
||||||
|
WiFiClient espClient;
|
||||||
|
PubSubClient MqttClient(espClient);
|
||||||
|
IPAddress IpMqtt;
|
||||||
|
|
||||||
|
WiFiUDP ntpUDP;
|
||||||
|
NTPClient timeClient(ntpUDP, "192.168.89.210", 0, 20000); //Собственно сервер времени смещение и частоат запроса, но он вручную
|
||||||
|
const PROGMEM char *willmess = "{\"conn\":\"err\"}";
|
||||||
|
const char *mqttHostName = "metrics"; //Хостнейм брокера metrics.local cctv.automation.art //192.168.89.210
|
||||||
|
unsigned int mqttPort = 1883; //Порт брокера 1883 8889
|
||||||
|
|
||||||
|
String getMacAddress();
|
||||||
|
String macc = getMacAddress();
|
||||||
|
String topicTemp = "aastudio/act/" + macc + "/data/0";
|
||||||
|
String setTopic = "aastudio/act/" + macc + "/set/0";
|
||||||
|
String willTopicTemp = "aastudio/act/" + macc + "/status";
|
||||||
|
const PROGMEM char *mqttLogin = "AA_Lab", *mqttPass = "automation.art$";
|
||||||
|
|
||||||
|
byte setPercent = 0, setSpeedAnemo = 0;
|
||||||
|
int stateResistor = 0;
|
||||||
|
|
||||||
|
const char *mqttIPHost; //тут хранится IP хоста по хостнейму
|
||||||
|
unsigned long timingUpdate = 0, timingReqSensor = 0, timingSendMqtt = 0; //Таймеры для millis()
|
||||||
|
int PROGMEM nextM5Update = 450000, nextMqttSend = 5000; //каждые 7.5 минут запрос обновления с сервера
|
||||||
|
|
||||||
|
bool mqttSendFlag = false;
|
||||||
|
int reqCounter = 0;
|
||||||
|
long rssi = 0, minRes=1480, maxRes=2600;
|
||||||
|
char bufTopic[140], bufWillTopic[150], bufSetTopic[150];
|
||||||
|
|
||||||
|
int moveAnemo(byte percent);
|
||||||
|
int setMotor(bool Finput, int Binput);
|
||||||
|
//void callback(char *topic, byte *payload, unsigned int length);
|
||||||
|
int disconnectMQTT();
|
||||||
|
int SendMqttReq(bool sendVal, bool sendStatus, byte statusConn);
|
||||||
|
|
||||||
|
|
||||||
|
const int NUM_READ = 16; // количество усреднений для средних арифм. фильтров
|
||||||
|
|
||||||
|
float expRunningAverageAdaptive(float newVal) {
|
||||||
|
static int t = 0;
|
||||||
|
static int vals[NUM_READ];
|
||||||
|
static int average = 0;
|
||||||
|
if (++t >= NUM_READ) t = 0; // перемотка t
|
||||||
|
average -= vals[t]; // вычитаем старое
|
||||||
|
average += newVal; // прибавляем новое
|
||||||
|
vals[t] = newVal; // запоминаем в массив
|
||||||
|
return ((float)average / NUM_READ);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
void ledset(byte color = 0)
|
||||||
|
{
|
||||||
|
M5.dis.setBrightness(60); //Половина яркости
|
||||||
|
switch (color)
|
||||||
|
{
|
||||||
|
case 2:
|
||||||
|
M5.dis.drawpix(0, 0xf00000); //Зеленый
|
||||||
|
break;
|
||||||
|
case 1:
|
||||||
|
M5.dis.drawpix(0, 0x00ff00); //Красный
|
||||||
|
break;
|
||||||
|
case 3:
|
||||||
|
M5.dis.drawpix(0, 0x0000ff); //Синий
|
||||||
|
break;
|
||||||
|
case 4:
|
||||||
|
M5.dis.drawpix(0, 0xffffff); //Белый
|
||||||
|
break;
|
||||||
|
case 5:
|
||||||
|
M5.dis.drawpix(0, 0xffec00); //желтый
|
||||||
|
break;
|
||||||
|
|
||||||
|
default:
|
||||||
|
M5.dis.clear();
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
//Настройки
|
||||||
|
|
||||||
|
int getIpBlock(int index, String str)
|
||||||
|
{
|
||||||
|
char separator = '.';
|
||||||
|
int found = 0;
|
||||||
|
int strIndex[] = {0, -1};
|
||||||
|
int maxIndex = str.length() - 1;
|
||||||
|
|
||||||
|
for (int i = 0; i <= maxIndex && found <= index; i++)
|
||||||
|
{
|
||||||
|
if (str.charAt(i) == separator || i == maxIndex)
|
||||||
|
{
|
||||||
|
found++;
|
||||||
|
strIndex[0] = strIndex[1] + 1;
|
||||||
|
strIndex[1] = (i == maxIndex) ? i + 1 : i;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
return found > index ? str.substring(strIndex[0], strIndex[1]).toInt() : 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
IPAddress str2IP(String str)
|
||||||
|
{
|
||||||
|
IPAddress ret(getIpBlock(0, str), getIpBlock(1, str), getIpBlock(2, str), getIpBlock(3, str));
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
int setMqttServer(const char *mqttHostNameF, unsigned int mqttPortF)
|
||||||
|
{
|
||||||
|
mdns_init();
|
||||||
|
|
||||||
|
IPAddress ipaddr;
|
||||||
|
OTApreferences.begin("ota-config");
|
||||||
|
|
||||||
|
OTApreferences.putString("mqttip", "0");
|
||||||
|
delay(1000);
|
||||||
|
String keyIpMqtt = OTApreferences.getString("mqttip", "0");
|
||||||
|
Serial.print("keyIpMqtt: ");
|
||||||
|
Serial.println(keyIpMqtt);
|
||||||
|
|
||||||
|
if (keyIpMqtt == "0")
|
||||||
|
{
|
||||||
|
//Запрос по хостнейму .local
|
||||||
|
ipaddr = MDNS.queryHost(mqttHostNameF, 4000);
|
||||||
|
//Таймаут 4 секунды
|
||||||
|
//Если не получили по хостнейму МДНС
|
||||||
|
Serial.print("mdns: ");
|
||||||
|
Serial.println(ipaddr);
|
||||||
|
|
||||||
|
if (ipaddr.toString() == "0.0.0.0")
|
||||||
|
{
|
||||||
|
//Запрос к ДНС по адресу сайта
|
||||||
|
int err = WiFi.hostByName(mqttHostNameF, ipaddr);
|
||||||
|
////real internal timeout in lwip library is 14[s]
|
||||||
|
//Если получили по хостнейму
|
||||||
|
if (err == 1)
|
||||||
|
{
|
||||||
|
Serial.print("hostByName: ");
|
||||||
|
Serial.println(ipaddr);
|
||||||
|
MqttClient.setServer(ipaddr, mqttPortF);
|
||||||
|
OTApreferences.putString("mqttip", ipaddr.toString());
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
Serial.print("All method not FOUND IP");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{ //Если все хорошо
|
||||||
|
OTApreferences.putString("mqttip", ipaddr.toString());
|
||||||
|
MqttClient.setServer(ipaddr, mqttPortF);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
MqttClient.setServer(str2IP(keyIpMqtt), mqttPortF);
|
||||||
|
}
|
||||||
|
|
||||||
|
//MqttClient.setCallback(callback);
|
||||||
|
OTApreferences.end();
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
//Запрос времени NTP и установка локлаьного времени
|
||||||
|
int reqNtpTime()
|
||||||
|
{
|
||||||
|
if (timeClient.update())
|
||||||
|
{
|
||||||
|
uint32_t timeEpoch = timeClient.getEpochTime();
|
||||||
|
if (timeEpoch < 1600000000)
|
||||||
|
{
|
||||||
|
Serial.println("Error reqNtpTime() Time");
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
setTime(timeEpoch);
|
||||||
|
// Serial.print(timeEpoch);
|
||||||
|
// Serial.print(" <=ntp== ==device=> ");
|
||||||
|
// Serial.println(now());
|
||||||
|
}
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
// //{"percent":50,"speed":20}
|
||||||
|
// void callback(char *topic, byte *payload, unsigned int length)
|
||||||
|
// {
|
||||||
|
// Serial.print("Message arrived [");
|
||||||
|
// Serial.print(topic);
|
||||||
|
// Serial.print("] ");
|
||||||
|
// char jsonResult[250];
|
||||||
|
// for (int i = 0; i < length; i++)
|
||||||
|
// {
|
||||||
|
// Serial.print((char)payload[i]);
|
||||||
|
// jsonResult[i] = (char)payload[i];
|
||||||
|
// }
|
||||||
|
// DeserializationError error = deserializeJson(docResult, jsonResult);
|
||||||
|
// if (error)
|
||||||
|
// {
|
||||||
|
// Serial.print(F("deserializeJson() failed: "));
|
||||||
|
// return;
|
||||||
|
// }
|
||||||
|
// setPercent = (byte)docResult["amount"]; //0-100
|
||||||
|
// // setSpeedAnemo = (byte)docResult["speed"]; //speed
|
||||||
|
// }
|
||||||
|
|
||||||
|
//Нажатие кнопки для сброса
|
||||||
|
void checkButton()
|
||||||
|
{
|
||||||
|
Serial.println("Button RESET Pressed");
|
||||||
|
disconnectMQTT();
|
||||||
|
delay(100);
|
||||||
|
OTApreferences.begin("ota-config");
|
||||||
|
OTApreferences.putString("mqttip", "0");
|
||||||
|
OTApreferences.end();
|
||||||
|
wm.resetSettings();
|
||||||
|
ESP.restart();
|
||||||
|
}
|
||||||
|
|
||||||
|
//Обновление прошивки, происходит проверка и загрузка
|
||||||
|
//Делается Get запрос на хостинг проверяется хеш, если хеш
|
||||||
|
void OTAUpdate()
|
||||||
|
{
|
||||||
|
////Serial.\println("OTAUpdate()");
|
||||||
|
bool flagOTA = false;
|
||||||
|
String keyOTA;
|
||||||
|
String payload;
|
||||||
|
OTApreferences.begin("ota-config");
|
||||||
|
if (WiFi.status() == WL_CONNECTED)
|
||||||
|
{
|
||||||
|
|
||||||
|
HTTPClient http;
|
||||||
|
String serverPath = "http://meteosence.s-host.net/airqa/airquality.php?meteopas=sdsfsd45540dfdfsksfl45&mac = " + macc + " &meteodata = gethash";
|
||||||
|
http.begin(serverPath.c_str());
|
||||||
|
int httpResponseCode = http.GET();
|
||||||
|
|
||||||
|
if (httpResponseCode > 0)
|
||||||
|
{
|
||||||
|
Serial.print("HTTP Response code: ");
|
||||||
|
Serial.println(httpResponseCode);
|
||||||
|
payload = http.getString();
|
||||||
|
Serial.println(payload);
|
||||||
|
|
||||||
|
if (payload != "errno" || payload != "errfi")
|
||||||
|
{
|
||||||
|
|
||||||
|
keyOTA = OTApreferences.getString("md5HashOTA");
|
||||||
|
|
||||||
|
if (keyOTA.length() <= 0)
|
||||||
|
{
|
||||||
|
OTApreferences.putString("md5HashOTA", "undifined");
|
||||||
|
}
|
||||||
|
|
||||||
|
keyOTA = OTApreferences.getString("md5HashOTA");
|
||||||
|
|
||||||
|
if (payload != keyOTA)
|
||||||
|
{
|
||||||
|
flagOTA = true;
|
||||||
|
OTApreferences.putString("md5HashOTA", payload);
|
||||||
|
//Serial.println("flagOTA = true;");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
|
||||||
|
Serial.print("Error code HTTP: ");
|
||||||
|
Serial.println(httpResponseCode);
|
||||||
|
}
|
||||||
|
// Free resources
|
||||||
|
http.end();
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
|
||||||
|
Serial.println("WiFi Disconnected");
|
||||||
|
}
|
||||||
|
|
||||||
|
if (flagOTA == true)
|
||||||
|
{
|
||||||
|
flagOTA = false;
|
||||||
|
//Serial.println("flagOTA = false;");
|
||||||
|
|
||||||
|
t_httpUpdate_return ret = ESPhttpUpdate.update("http://meteosence.s-host.net/airqa/tenzo/tenzo.bin");
|
||||||
|
|
||||||
|
//После update ничего не происходит, такая вот особенность.
|
||||||
|
//Если все прошло хорошо, перезагрузка на новую прошивку
|
||||||
|
|
||||||
|
//Serial.print("ret ");
|
||||||
|
//Serial.println(ret);
|
||||||
|
|
||||||
|
switch (ret)
|
||||||
|
{
|
||||||
|
|
||||||
|
case HTTP_UPDATE_FAILED:
|
||||||
|
//Serial.printf("HTTP_UPDATE_FAILD Error (%d): %s", ESPhttpUpdate.getLastError(), ESPhttpUpdate.getLastErrorString().c_str());
|
||||||
|
//Serial.println(ESPhttpUpdate.getLastError());
|
||||||
|
//Serial.println(ESPhttpUpdate.getLastErrorString().c_str());
|
||||||
|
//Serial.println("HTTP_UPDATE_FAILD Error");
|
||||||
|
|
||||||
|
ESP.restart();
|
||||||
|
break;
|
||||||
|
|
||||||
|
case HTTP_UPDATE_NO_UPDATES:
|
||||||
|
//Serial.println("HTTP_UPDATE_NO_UPDATES");
|
||||||
|
|
||||||
|
ESP.restart();
|
||||||
|
break;
|
||||||
|
|
||||||
|
case HTTP_UPDATE_OK:
|
||||||
|
//Serial.println("HTTP_UPDATE_OK");
|
||||||
|
|
||||||
|
ESP.restart();
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
OTApreferences.end();
|
||||||
|
}
|
||||||
|
|
||||||
|
//Получение мак адреса
|
||||||
|
String getMacAddress()
|
||||||
|
{
|
||||||
|
uint8_t baseMac[6];
|
||||||
|
esp_read_mac(baseMac, ESP_MAC_WIFI_STA);
|
||||||
|
char baseMacChr[18] = {0};
|
||||||
|
sprintf(baseMacChr, "%02X%02X%02X%02X%02X%02X", baseMac[0], baseMac[1], baseMac[2], baseMac[3], baseMac[4], baseMac[5]);
|
||||||
|
return String(baseMacChr);
|
||||||
|
}
|
||||||
|
|
||||||
|
//Отправка данных по MQTT
|
||||||
|
int SendMqttReq(bool sendVal = true, bool sendStatus = true, byte statusConn = 1)
|
||||||
|
{
|
||||||
|
if (mqttSendFlag == true)
|
||||||
|
{
|
||||||
|
char resultString[200];
|
||||||
|
String JsonData = "";
|
||||||
|
rssi = WiFi.RSSI();
|
||||||
|
unsigned long timeNow = now();
|
||||||
|
|
||||||
|
doc["filter"] = digitalRead(BPin);
|
||||||
|
doc["preassure"] = expRunningAverageAdaptive((hx711.read()/1000));
|
||||||
|
doc["ts"] = timeNow;
|
||||||
|
|
||||||
|
serializeJson(doc, JsonData);
|
||||||
|
doc.remove("ts");
|
||||||
|
doc.remove("preassure");
|
||||||
|
doc.remove("filter");
|
||||||
|
doc.clear();
|
||||||
|
doc.garbageCollect();
|
||||||
|
|
||||||
|
Serial.println(JsonData); //Вывод JSON строки в консоль
|
||||||
|
JsonData.toCharArray(resultString, JsonData.length() + 1);
|
||||||
|
MqttClient.publish(bufTopic, resultString, true);
|
||||||
|
|
||||||
|
if (sendStatus == true)
|
||||||
|
{
|
||||||
|
const char *conn;
|
||||||
|
switch (statusConn)
|
||||||
|
{
|
||||||
|
case 1:
|
||||||
|
conn = "on";
|
||||||
|
break;
|
||||||
|
|
||||||
|
case 2:
|
||||||
|
conn = "off";
|
||||||
|
break;
|
||||||
|
|
||||||
|
case 3:
|
||||||
|
conn = "slp";
|
||||||
|
break;
|
||||||
|
|
||||||
|
case 4:
|
||||||
|
conn = "upd";
|
||||||
|
break;
|
||||||
|
|
||||||
|
default:
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
doc["conn"] = conn;
|
||||||
|
doc["rssi"] = rssi;
|
||||||
|
doc["bsid"] = WiFi.BSSIDstr();
|
||||||
|
doc["ts"] = timeNow;
|
||||||
|
doc["exp"] = timeNow + 20000;
|
||||||
|
doc["sv"] = VersionSW;
|
||||||
|
|
||||||
|
JsonData = "";
|
||||||
|
serializeJson(doc, JsonData);
|
||||||
|
Serial.println(JsonData); //Вывод JSON строки в консоль
|
||||||
|
|
||||||
|
doc.clear();
|
||||||
|
doc.garbageCollect();
|
||||||
|
|
||||||
|
JsonData.toCharArray(resultString, JsonData.length() + 1);
|
||||||
|
MqttClient.publish(bufWillTopic, resultString, true);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
//Переподключение при петери связи с MQTT
|
||||||
|
//7 раз проверили и вернулись в общий цикл что бы вдруг что втянуть обновления
|
||||||
|
void reconnectMqtt()
|
||||||
|
{
|
||||||
|
byte circle = 0;
|
||||||
|
while (!MqttClient.connected())
|
||||||
|
{
|
||||||
|
circle++;
|
||||||
|
if (circle == 5)
|
||||||
|
{
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
String maccrandom = macc + String(random(0xffff), HEX);
|
||||||
|
const char *clientId = maccrandom.c_str();
|
||||||
|
|
||||||
|
if (MqttClient.connect(clientId, mqttLogin, mqttPass, bufWillTopic, 2, true, willmess))
|
||||||
|
{
|
||||||
|
Serial.println("Mqttconnect - OK");
|
||||||
|
mqttSendFlag = true;
|
||||||
|
// MqttClient.subscribe(bufSetTopic);
|
||||||
|
SendMqttReq(false, true, 1);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
Serial.print("Mqtt.state() = ");
|
||||||
|
Serial.println(MqttClient.state());
|
||||||
|
/*
|
||||||
|
-4 : MQTT_CONNECTION_TIMEOUT - the server didn't respond within the keepalive time
|
||||||
|
-3 : MQTT_CONNECTION_LOST - the network connection was broken
|
||||||
|
-2 : MQTT_CONNECT_FAILED - the network connection failed
|
||||||
|
-1 : MQTT_DISCONNECTED - the client is disconnected cleanly
|
||||||
|
0 : MQTT_CONNECTED - the client is connected
|
||||||
|
1 : MQTT_CONNECT_BAD_PROTOCOL - the server doesn't support the requested version of MQTT
|
||||||
|
2 : MQTT_CONNECT_BAD_CLIENT_ID - the server rejected the client identifier
|
||||||
|
3 : MQTT_CONNECT_UNAVAILABLE - the server was unable to accept the connection
|
||||||
|
4 : MQTT_CONNECT_BAD_CREDENTIALS - the username/password were rejected
|
||||||
|
5 : MQTT_CONNECT_UNAUTHORIZED - the client was not authorized to connect
|
||||||
|
*/
|
||||||
|
mqttSendFlag = false;
|
||||||
|
delay(500);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void setup()
|
||||||
|
{
|
||||||
|
Serial.begin(115200);
|
||||||
|
Serial.setDebugOutput(true);
|
||||||
|
M5.begin(true, false, true);
|
||||||
|
|
||||||
|
pinMode(APin, OUTPUT);
|
||||||
|
pinMode(BPin, INPUT);
|
||||||
|
digitalWrite(APin, HIGH);
|
||||||
|
|
||||||
|
|
||||||
|
delay(50);
|
||||||
|
pinMode(TRIGGER_PIN, INPUT);
|
||||||
|
|
||||||
|
WiFi.mode(WIFI_STA);
|
||||||
|
|
||||||
|
delay(100);
|
||||||
|
|
||||||
|
Serial.println(setTopic);
|
||||||
|
Serial.println(topicTemp);
|
||||||
|
Serial.println(willTopicTemp);
|
||||||
|
|
||||||
|
setTopic.toCharArray(bufSetTopic, setTopic.length() + 1);
|
||||||
|
topicTemp.toCharArray(bufTopic, topicTemp.length() + 1);
|
||||||
|
willTopicTemp.toCharArray(bufWillTopic, willTopicTemp.length() + 1);
|
||||||
|
|
||||||
|
// wm.resetSettings(); // wipe settings
|
||||||
|
|
||||||
|
std::vector<const char *> menu = {"wifi", "info", "param", "sep", "restart", "exit"};
|
||||||
|
wm.setMenu(menu);
|
||||||
|
// set dark theme
|
||||||
|
wm.setClass("invert");
|
||||||
|
wm.setConfigPortalTimeout(30); // auto close configportal after n seconds
|
||||||
|
wm.setMinimumSignalQuality(10); // set min RSSI (percentage) to show in scans, null = 8%
|
||||||
|
wm.setScanDispPerc(true); // show RSSI as percentage not graph icons
|
||||||
|
wm.setWiFiAutoReconnect(true); // if true, enable autoreconnecting
|
||||||
|
|
||||||
|
bool res;
|
||||||
|
|
||||||
|
res = wm.autoConnect("TensoM5Portal", "12345678"); // Подключение к анонимной точке доступа
|
||||||
|
if (!res)
|
||||||
|
{
|
||||||
|
Serial.println("Failed to connect or hit timeout");
|
||||||
|
ESP.restart();
|
||||||
|
}
|
||||||
|
|
||||||
|
if (reqNtpTime() == 1)
|
||||||
|
{
|
||||||
|
reqNtpTime();
|
||||||
|
}
|
||||||
|
|
||||||
|
setMqttServer(mqttHostName, mqttPort);
|
||||||
|
}
|
||||||
|
|
||||||
|
void loop()
|
||||||
|
{
|
||||||
|
M5.update();
|
||||||
|
|
||||||
|
if (WiFi.status() != WL_CONNECTED)
|
||||||
|
{
|
||||||
|
Serial.println(WiFi.status());
|
||||||
|
ESP.restart();
|
||||||
|
}
|
||||||
|
|
||||||
|
if (!MqttClient.connected())
|
||||||
|
{
|
||||||
|
reconnectMqtt();
|
||||||
|
}
|
||||||
|
|
||||||
|
if (millis() - timingSendMqtt > nextMqttSend)
|
||||||
|
{
|
||||||
|
SendMqttReq(true,true,1);
|
||||||
|
timingSendMqtt = millis();
|
||||||
|
}
|
||||||
|
|
||||||
|
// 40 секунд и происходит сброс настроек WIFI
|
||||||
|
if (M5.Btn.wasReleasefor(40000))
|
||||||
|
{
|
||||||
|
checkButton();
|
||||||
|
}
|
||||||
|
|
||||||
|
//По таймеру запруск обновления прошивки
|
||||||
|
if (millis() - timingUpdate > nextM5Update)
|
||||||
|
{
|
||||||
|
reqNtpTime();
|
||||||
|
SendMqttReq(false, true, 4);
|
||||||
|
OTAUpdate();
|
||||||
|
SendMqttReq(false, true, 1);
|
||||||
|
timingUpdate = millis();
|
||||||
|
}
|
||||||
|
|
||||||
|
//Таймер отправки данных в брокер
|
||||||
|
MqttClient.loop();
|
||||||
|
}
|
||||||
|
|
||||||
|
int disconnectMQTT()
|
||||||
|
{
|
||||||
|
MqttClient.disconnect();
|
||||||
|
return 0;
|
||||||
|
}
|
|
@ -0,0 +1,11 @@
|
||||||
|
|
||||||
|
This directory is intended for PlatformIO Unit Testing and project tests.
|
||||||
|
|
||||||
|
Unit Testing is a software testing method by which individual units of
|
||||||
|
source code, sets of one or more MCU program modules together with associated
|
||||||
|
control data, usage procedures, and operating procedures, are tested to
|
||||||
|
determine whether they are fit for use. Unit testing finds problems early
|
||||||
|
in the development cycle.
|
||||||
|
|
||||||
|
More information about PlatformIO Unit Testing:
|
||||||
|
- https://docs.platformio.org/page/plus/unit-testing.html
|
Loading…
Reference in New Issue